Archive

This engineering study evaluates and calibrates an EMF area monitor for the 300 kHz–20 MHz frequency band using a multi-wire transverse electromagnetic (MWTEM) transmission line as a controlled electric-field source. The authors highlight that low-frequency electric-field measurements can be sensitive to boundary…

This engineering/food-processing study evaluates pulsed electric field (PEF) treatment of fresh Artrhospira platensis biomass to enhance aqueous extraction of C-phycocyanin. Extraction depended on electric field strength, treatment time, and application temperature, with higher temperatures reducing the required…

This engineering study demonstrates magnetophoretic track designs that transport single magnetized beads and magnetically labeled single cells in a 3D time-varying magnetic field. A vertical field bias is reported to reduce particle clustering but necessitates redesigned track geometries with alternating curvature.…

This engineering study examines composite optical dipole nano-antennas made of alternating silica and gold layers. It reports that a 50% filling factor yields a 2.0× increase in electric-field enhancement compared with a pure-gold antenna. The abstract frames the work in terms of photonics applications rather than…

This engineering-focused paper reports the design principle and performance of a MALDI ion source ("MALDI-2") combining rarefied supersonic gas jets with weak electric fields and injection into gas-filled RF multipoles. The abstract reports rapid collisional cooling (

This engineering/clinical MRI methods study evaluated ultrafast volumetric DREAM B1+ mapping to refine patient-adaptive RF shimming at 3T. In 20 patients and three volunteers, a multi-slice adaptive RF shimming approach reduced flip-angle deviations and improved B1+ homogeneity compared with central-slice-based…

This physics study analyzes circular wave packets in high Rydberg states produced by applying a pulsed electric field to extreme Stark states. It reports a position-dependent energy gradient that creates a correlation between principal quantum number and spatial coordinate, which appears insensitive to the initial…

This engineering materials study reports fabrication and characterization of nanocomposite dielectrics in a PbO-BaO-Na2O-Nb2O5-SiO2 glass-ceramic system. X-ray diffraction and microstructural observations describe temperature-dependent phase formation with nanometer-sized crystallites dispersed in a glass matrix. The…

This paper describes the design and preliminary implementation of a mobile-phone-based wireless blood pressure monitoring system that transmits data via Bluetooth and computes blood pressure and heart rate on the phone. The authors state that experiments demonstrated the device’s reliability and stability, and that…

This methods paper addresses how B0 (main field) and B1 (transmit field) inhomogeneities can bias SPGR and bSSFP steady-state MRI signals used for multicomponent T1/T2 relaxometry and myelin water analysis. It describes using DESPOT1-HIFI to calibrate flip angles and adding a B0-related parameter with multiple…

This engineering/food science study examined ohmic heating of peaches at 60 V/cm using bipolar pulses across frequencies from 50 Hz to 1 MHz. Heating time to a target temperature and multiple electrical properties were frequency-dependent, particularly for intact tissue. The authors report faster electro-thermal…

This study describes an electrooptical technique for polydisperse colloid solutions using short pulses of strong sine-shaped electric field, intended for systems that cannot withstand prolonged field exposure. The authors report that key particle parameters can still be extracted from the resulting experimental data.…

This condensed-matter physics study examined how high magnetic fields and pressure affect magnetization, transport, and thermodynamic properties of the intermediate-valence compound YbPd. The authors report that the Yb valence state and two first-order transitions are stable up to 55 T, while increasing pressure…

This paper discusses the Czjzek model for distributions of electric field gradient (EFG) tensors in disordered solids and highlights its underlying assumptions and characteristics. It then introduces an extended model that combines a defined local EFG environment with an adjustable Gaussian (Czjzek) noise term to…

This methods study evaluated an MRI-based surface distance measurements (SDM) approach for localizing Broca's area for TMS coil placement without external tracking devices. Coil positioning using SDM was compared with an advanced frameless stereotaxic navigation system. The reported mean difference between methods…

This paper proposes metallic nanowires as complementary structures to metallic nanogaps for enhancing magnetic fields. It reports magnetic field enhancement up to a factor of 300 and presents a surface-impedance-based analytic theory that is numerically confirmed. The authors also report that, in the sub-skin-depth…

This engineering study examined how a DC bias electric field affects the resonance frequency shift of a PMN-PT/tin piezoelectric microcantilever sensor during humidity detection. The authors report that applying a bias field enhanced the relative resonance frequency shift, with a maximum enhancement of more than…

This engineering study used experiments, computer simulations, and simplified analytical calculations to examine how mashed potato dielectric properties and circulating water electrical conductivity affect RF heating at 27 MHz. The authors report that higher circulating water conductivity and higher salt content in…

This engineering-focused paper compares carbon nanotube growth in dense low-temperature plasma versus on a substrate surface using hybrid/Monte-Carlo simulations. It reports that plasma parameters strongly influence ion fluxes and nanotube growth kinetics, with large differences in growth rates and fluxes between…

This engineering study investigated factors affecting current when an electric field is applied in-line in a capillary separation system. Temperature measurements and a replicated cooling setup were used to estimate Joule heating effects, which were reported to be relatively small. In contrast, significant pH shifts…

This engineering study examines multi-wall carbon nanotubes suspended in water exposed to AC electric fields generated by 3D electrodes. It reports field-induced polarization leading to nanotube alignment and long-range, electrically conducting assemblies spanning the electrode gap, with assembly length controlled by…